Subway Dreams

IND Subway Station Backdrops

Innovative and New

Our Current IND Subway Station Backdrops

Images Digitally Watermarked by Digimarc | Get More Information on 
							How to Digitally Watermark Images Images on the website have been digitally watermarked with ownership and usage information. Digimarc and the Digimarc logo are registered trademarks of Digimarc Corporation. The "Digimarc-Enabled" Web Button is a trademark of Digimarc Corporation, used with permission.

 

New Ordering Choices:

  1. Standard Kit - This is where you receive 5 prints that you assemble together. (This is how we've done it for 15 years.) This is shipped in a stay flat envelope.
  2. Single Sheet - Your print is on a Single Sheet.  It will be the same length as the standard only that is 1 sheet, rolled and mailed in a special tube.
  3. Single Sheet w/Adhesive - Your print is on a Single Sheet with an adhesive backing.  It will be the same length as the standard only that is 1 sheet, rolled and mailed in a special tube.

 

5th Avenue 53rd Street Upper Level (8th Avenue Local)

Click of photo for full sized image. It will open a new window for you to view it in.

This station is printed on 5 heavy index stock card sheets.  the sheets are 8.5" x 14". The length of the station is 56" x 4¾" tall. Available in O scale Only.

FYI - The 8th Avenue Line

5th Ave 53rd Street Opened 8/19/1933, with two levels, one track and one side platform on each level. The platforms are on the south side of the tracks. Trains heading to Manhattan use the upper level and trains to Queens trains use the lower level. The upper platform is approximately 60 feet below the street, the lower level approximately 80 feet below the street.

$23.25

Printed Sheet Style
****All subway backdrops are a little exaggerated in size. Platform height from top to bottom is approximately 1 3/8" tall.  This is done because people use roadbed or have other surfaces that raise the track higher.  It can always be trimmed off of the bottom to make it line up with subway car door.  Also the exaggerated size makes the station look better on the layout especially when located in the back or farther viewing distance from the station. If you need an exact measurement, please let us know the measurement and we will correct it for you at no additional charge!

5th Avenue 53rd Street Lower Level (8th Avenue Local) 

 

Click of photo for full sized image. It will open a new window for you to view it in.

This station is printed on 5 heavy index stock card sheets.  the sheets are 8.5" x 14". The length of the station is 56" x 4¾" tall. Available in O scale Only.

FYI - The 8th Avenue Line

5th Ave 53rd Street Opened 8/19/1933, with two levels, one track and one side platform on each level. The platforms are on the south side of the tracks. Trains heading to Manhattan use the upper level and trains to Queens trains use the lower level. The upper platform is approximately 60 feet below the street, the lower level approximately 80 feet below the street.

$23.25

Printed Sheet Style
****All subway backdrops are a little exaggerated in size. Platform height from top to bottom is approximately 1 3/8" tall.  This is done because people use roadbed or have other surfaces that raise the track higher.  It can always be trimmed off of the bottom to make it line up with subway car door.  Also the exaggerated size makes the station look better on the layout especially when located in the back or farther viewing distance from the station. If you need an exact measurement, please let us know the measurement and we will correct it for you at no additional charge!

42nd Street 8th Avenue with Graffiti (8th Avenue Line) 

 

Click of photo for full sized image. It will open a new window for you to view it in.

This station is printed on 5 heavy index stock card sheets.  the sheets are 8.5" x 14". The length of the station is 56" x 4¾" tall. Available in O scale Only.

FYI - The 8th Avenue Line 

42nd Street-Times Square is part of a massive station complex, four stations, on the IRT Times Square-Grand Central Shuttle, IRT West Side Line, BMT Broadway Line, and IRT Flushing Line, all joined together by a vast mezzanine and underground swath of connecting passageways; and a fifth station a long way west by underground passageway, on the IND 8th Avenue/Fulton Street/Rockaway Line at the 42nd Street-Port Authority Bus Terminal. These are the approximate depths of the stations in the Times Square structural complex.
•Shuttle Line - 20 feet below street
•7th Ave./West Side IRT - 40 feet below street
•Broadway BMT Line - 50 feet below street
•Flushing/#7 IRT Line - 60 feet below street

$23.25

Printed Sheet Style
****All subway backdrops are a little exaggerated in size. Platform height from top to bottom is approximately 1 3/8" tall.  This is done because people use roadbed or have other surfaces that raise the track higher.  It can always be trimmed off of the bottom to make it line up with subway car door.  Also the exaggerated size makes the station look better on the layout especially when located in the back or farther viewing distance from the station. If you need an exact measurement, please let us know the measurement and we will correct it for you at no additional charge!

42nd Street 8th Avenue (8th Avenue Line) 

 

Click of photo for full sized image. It will open a new window for you to view it in.

This station is printed on 5 heavy index stock card sheets.  the sheets are 8.5" x 14". The length of the station is 56" x 4¾" tall. Available in O scale Only.

FYI - The 8th Avenue Line

42nd Street-Times Square is part of a massive station complex, four stations, on the IRT Times Square-Grand Central Shuttle, IRT West Side Line, BMT Broadway Line, and IRT Flushing Line, all joined together by a vast mezzanine and underground swath of connecting passageways; and a fifth station a long way west by underground passageway, on the IND 8th Avenue/Fulton Street/Rockaway Line at the 42nd Street-Port Authority Bus Terminal. These are the approximate depths of the stations in the Times Square structural complex.
•Shuttle Line - 20 feet below street
•7th Ave./West Side IRT - 40 feet below street
•Broadway BMT Line - 50 feet below street
•Flushing/#7 IRT Line - 60 feet below street

$23.25

Printed Sheet Style
****All subway backdrops are a little exaggerated in size. Platform height from top to bottom is approximately 1 3/8" tall.  This is done because people use roadbed or have other surfaces that raise the track higher.  It can always be trimmed off of the bottom to make it line up with subway car door.  Also the exaggerated size makes the station look better on the layout especially when located in the back or farther viewing distance from the station. If you need an exact measurement, please let us know the measurement and we will correct it for you at no additional charge!

81st Street Museum of Natural History (8th Ave Line)

 

Click of photo for full sized image. It will open a new window for you to view it in.

This station is printed on 5 heavy index stock card sheets.  the sheets are 8.5" x 14". The length of the station is 56" x 4¾" tall. Available in O scale Only.

FYI - 81st Street Museum of Natural History Station

was opened  9/10/1932.  The stations most recent renovation It has gone through a major renovation consisting of granite, bronze, ceramic and glass mosaic  murals.  It is called "For want of a Nail" and was installed by the MTA Arts team. It represents the timeline of life starting with the "Big Bang" through the present day. You will find all of these great works of art throughout the station, it is like walking through a museum itself.  It is worth the ride to check out this station.

Through the evolution line, the designing artists from MTA and the American Museum of Natural History led visitors into exploring the question of "Where do we come from?" ... The journey on the platform starts from prehistoric organisms to the fiery earths core to the swirl of heavens. Insects, animals, sea life, the earth, and constellations change in hues at every step. From the molecular to the cosmic, the changing along the revolution line indicated the interconnectedness of life and the universe. - NYU University source. 

$23.25

Printed Sheet Style
****All subway backdrops are a little exaggerated in size. Platform height from top to bottom is approximately 1 3/8" tall.  This is done because people use roadbed or have other surfaces that raise the track higher.  It can always be trimmed off of the bottom to make it line up with subway car door.  Also the exaggerated size makes the station look better on the layout especially when located in the back or farther viewing distance from the station. If you need an exact measurement, please let us know the measurement and we will correct it for you at no additional charge!

161st Street River Ave Yankee Stadium 

 

Click of photo for full sized image. It will open a new window for you to view it in.

This station is printed on 5 heavy index stock card sheets.  the sheets are 8.5" x 14". This is a extra long station, the length of the station is 79" x 4¾" tall. Available in O scale Only.

FYI - 161st Street River Avenue Yankee Stadium Station

was opened on 7/1/1933.

$25.50

Printed Sheet Style
****All subway backdrops are a little exaggerated in size. Platform height from top to bottom is approximately 1 3/8" tall.  This is done because people use roadbed or have other surfaces that raise the track higher.  It can always be trimmed off of the bottom to make it line up with subway car door.  Also the exaggerated size makes the station look better on the layout especially when located in the back or farther viewing distance from the station. If you need an exact measurement, please let us know the measurement and we will correct it for you at no additional charge!

Chambers St World Trade Center (8th Avenue Line)

 

Click of photo for full sized image. It will open a new window for you to view it in.

This station is printed on 5 heavy index stock card sheets.  the sheets are 8.5" x 14". This is a extra long station, the length of the station is 56" x 4¾" tall. Available in O scale Only.

FYI - Chambers Street World Trade Center Station

was opened on 9/10/1932. The complex has several levels and crossings, these are the approximate depths of the various lines through out the Chambers street complex:
•A/C Chambers St. Platform, 20 feet below street
•E World Trade Center Platform, 20 feet
•Park Place IRT Platform, 60 feet
•BMT Cortlandt St. Station, 20 feet
•IRT Cortlandt St. Station, 40 feet
•Path Fare Control, 60 feet
•Path Platforms, 80 feet

$23.25

Printed Sheet Style
****All subway backdrops are a little exaggerated in size. Platform height from top to bottom is approximately 1 3/8" tall.  This is done because people use roadbed or have other surfaces that raise the track higher.  It can always be trimmed off of the bottom to make it line up with subway car door.  Also the exaggerated size makes the station look better on the layout especially when located in the back or farther viewing distance from the station. If you need an exact measurement, please let us know the measurement and we will correct it for you at no additional charge!

71st Street Continental Avenue (Queens Blvd Line) 

 

Click of photo for full sized image. It will open a new window for you to view it in.

This station is printed on 5 heavy index stock card sheets.  the sheets are 8.5" x 14". This is a extra long station, the length of the station is 56¼" x 4¾" tall. Available in O scale Only.

FYI - Continental Avenue

was opened on 12/31/1936. East of the station the line widens to six tracks, with two tracks starting between the local and express pairs. They dive to a lower level, widen to four tracks, and run on a lower level through 75th Ave. station. This is primarily for access to Jamaica Yard, off-peak train storage, and a turn-around-point for the terminating lines.

$23.25

Printed Sheet Style
****All subway backdrops are a little exaggerated in size. Platform height from top to bottom is approximately 1 3/8" tall.  This is done because people use roadbed or have other surfaces that raise the track higher.  It can always be trimmed off of the bottom to make it line up with subway car door.  Also the exaggerated size makes the station look better on the layout especially when located in the back or farther viewing distance from the station. If you need an exact measurement, please let us know the measurement and we will correct it for you at no additional charge!

Hoyt & Shermerhorn Street Brooklyn

 

Click of photo for full sized image. It will open a new window for you to view it in.

This station is printed on 5 heavy index stock card sheets.  the sheets are 8.5" x 14". This is a extra long station, the length of the station is 56" x 4¾" tall. Available in O scale Only.

FYI - Hoyt and Schermerhorn Streets

was opened 4/9/1936.  it is a 6 track station with 4 island platforms. Present day only 4 tracks are used, the center pair are used for the Brooklyn/Queens crosstown line, the middle pair of tracks are use for the 8th Avenue Line. The outer pair of tracks were used for the old HH local and shuttle service to Court St. Now a days the outer pair is used only for the Transit Museum. Sometimes they occasionally use the outer tracks for movies as well.

$23.25

Printed Sheet Style
****All subway backdrops are a little exaggerated in size. Platform height from top to bottom is approximately 1 3/8" tall.  This is done because people use roadbed or have other surfaces that raise the track higher.  It can always be trimmed off of the bottom to make it line up with subway car door.  Also the exaggerated size makes the station look better on the layout especially when located in the back or farther viewing distance from the station. If you need an exact measurement, please let us know the measurement and we will correct it for you at no additional charge!

74th Street Roosevelt Ave (Queens Blvd. Line) 

 

Click of photo for full sized image. It will open a new window for you to view it in.

This station is printed on 5 heavy index stock card sheets.  the sheets are 8.5" x 14". This is a extra long station, the length of the station is 56" x 4¾" tall. Available in O scale Only.

FYI - Roosevelt Avenue

was opened 8/18/1933. 

$23.25

Printed Sheet Style
****All subway backdrops are a little exaggerated in size. Platform height from top to bottom is approximately 1 3/8" tall.  This is done because people use roadbed or have other surfaces that raise the track higher.  It can always be trimmed off of the bottom to make it line up with subway car door.  Also the exaggerated size makes the station look better on the layout especially when located in the back or farther viewing distance from the station. If you need an exact measurement, please let us know the measurement and we will correct it for you at no additional charge!

Assembly Instructions

accordion screenshot

People use them in many different ways. We intended our backdrops to be mounted on a flat and stiff surface.  The most common item mounting materials used are Foam Boards.  They are readily available in hobby shops, office supply store and craft stores. While this is the easiest of ways to do it, there are many different way in which they are used. The following are example of how our customer have used them:

  • Mounted to Balsa Wood - What's great about balsa wood, is when using a "Grade A" sheet, you can bend them through different processes (check the internet for bending balsa wood).  Stations are not always straight, they are on curves and if you have a station placed on a curve, this would probably be the best and easiest way to do it. If you go this route, please bend the balsa wood first before Applying the graphics to it.
  • Mounted to Wood - If your station is on a straight section, then you can use wood to mount them on. If you have wood laying around, you can use it, instead of going out to buy anything else to use.
  • Mounted to Cardboard - People have done it.  We do not recommend it, because cardboard tend to loose it's stiffness during humid conditions and will start to bend. Use it if you are doing a temporary layout, in order to save money, otherwise don't use cardboard.
  • Mounted to Plexiglas - People sometimes use Plexiglas as a backing around their layouts.  If this is your case and you need a station at a particular section, you can mount them the the Plexiglas.
  • Mounted to Bass Wood - This is an excellent choice.  It is stronger than Balsa Wood, but requires a little more effort to work with than balsa wood. you can bend Bass Wood as well (check the internet for bending Bass Wood).

I am sure there are many other materials out there that they can be mounted to, just be sure that they will be suitable for you use.

Contact us if you need help

accordion screenshot

There are a couple of ways to do this (see cutting your backdrop), we recommend having the following:

  • A clear and clean work area (make sure that you have a cutting mat something down to protect cutting area on your table top so you won't cut or scratch your table top).
  • A good pair of sharp scissors (if you are really good with a scissor and can make real good straight cuts, you won't need the razor knife, ruler and clamps).
  • A self-sealing cutting mat.
  • An X-acto knife or razor knife.
  • A metal ruler (18" or longer, used together with the razor knife to make straight cuts).
  • A pair of clamps (used to hold ruler and paper in place while making straight cuts).
  • A can of repositionable adhesive spray (we use 3M brand "Repositionable 75 Spray Adhesive, if using another brand, make sure it says repositionable and won't bleed. Repositionable because in case you do not have it line up properly, you mover it around)
  • Mounting material as mentioned earlier. (foam board, balsa wood, etc.)

It is best that you practice cutting on scrap paper, before actually cutting out the backdrop.

Contact us if you need help

accordion screenshot

There are 2 ways of doing this, we prefer the first way:

Using the tools mentioned in the previous section:
  • First make sure your area is clean and clear.
  • Have all your tools laid out
  • Place your self-sealing cutting mat in front of you, near the edge of the table.
  • Place the first page you are going to cut in on top of the mat.
  • Next place the metal ruler on the page and line it up on the edge you are going to cut.
  • Take the clamps and place one at each end of the ruler.  You are using the claps to hold the ruler and paper down at the same time.  As you tighten the clamps, make sure the ruler is still at the edge of the backdrop where you are going to cut along.  Adjust the ruler as needed before finally tightening the clamps
  • Before actually cutting the backdrop, I suggest practice using the X-acto knife and make cuts using the setup mentioned above, just to get the hang of it, especially if you haven't done this before.
  • So now just take your X-acto knife and make a cut straight along side the ruler, on the side you need to cut of course, from one end to the other, pressing firmly, with enough pressure to cut through the paper.  Excessive pressure could cause you to slip and slide away from where the cut should be.
  • Now just repeat this again for the other side to be cut of the backdrop. Do this for all the sides of the sheets and keep them in order or with a pencil lightly mark each the back of each sheet, 1 ,2, 3, etc.
  • The second way to do this. (not recommended)
    • Have good sharp scissor that can cut index paper.
    • Just cut along the edge that has to be cut.
    • do this for all of the sides.
  • Surprise! a third way.
    • If you should happen to have one of those large paper cutters, by all means that will do it!
  • We feel not everyone has a very steady hand that could cut a 12" straight line.  You may be able to do the short side OK, but the long side, as many times as I have tried, I have failed better than 60% of the time.

    Contact us if you need help

    accordion screenshot

    In this section you will learn how we mount the backdrop to the surface you have chosen. When using spray adhesives, make sure your work area is covered with a drop cloth or something equivalent to it.  If you're not careful with the spray, it will get on the surface of what you are using and could ruin it. So lets start:

    • Make sure your work area is clear and clean.
    • Make sure you cut and trim your foam board first (or what you are using). You should already have cut out your backdrop by this time. Do a dry run first. take all the pieces and line them up on your surface to make sure everything is OK and cut right.
    • Start by taking the first backdrop sheet and turn it over, make sure it is clean. You do not have to soak the paper with the adhesive, use it sparingly.  Go lightly on the ends. when you press it down and smooth it out, you do not want to much glue on the end, otherwise it will spread out from underneath.
    • once you are happy with its position, start with the next one.  Again try it without the adhesive first, then use the ahesive. Once it is down, DO NOT press it down until you are satisfied on its position and the line up. Once you are satisfied, smooth it out by rubbing it with a cloth, going in the opposite direction of the first sheet.  You do not want any excess to go on the first sheet.
    • Just repeat until you are all finished.
    • Now you are done with the hardest part.

    Now when placing the backdrop were you want it, you will need a base to hold up the backdrop, unless you are mounting it on the wall.  One way is to use a 1" x 1" strip of wood, cut to the length of the whole backdrop and mount the bottom of the backdrop to it and now it will stand.  Another way is to make small wooden right triangles about 4" tall x 2½" wide and ¼" thick.  This is a good way, especially if you made your backdrop on a curve.

    Contact us if you need help

    Useful Information and Tips for Working with Different Paper Projects

    accordion screenshot

    A good pair of sharp scissors is one of the most important tools you will need.

    • Dull scissors can rip the paper, make uneven cuts, and they can be hard to control when precision cutting is key. You can also invest in scissor sharpeners.
    • Having a few different scissors for different tasks can also be helpful. Use one pair for cutting thin paper, one pair for hacking and cutting thicker paper and cardboard.
    • A pair of needle-nose scissors for cutting small details.
    • For cutting out tiny, delicate cone shapes, you might try a good pair of fingernail clippers. They can quickly cut out the tiny center wedges. The blades typically have a slight curve to them which is not too noticeable.

    Contact us if you have any questions

    accordion screenshot

    A favored tool for cutting small details and cutting holes is a craft knife (X-acto is a popular brand). It is simply a tiny, VERY sharp blade that comes to a point and has a long, thin handle.

    • In a good knife, the blades are replaceable, and many sizes andshapes are available.
    • These blades are very dangerous; one wrong slip, and they can cut you quickly and deeply. This is the voice of experience.
    • A craft knife can be your best friend, but it can't live up to its full potential without its partner, a cutting mat.
    • Don't use the plastic/acrylic cutting mats that you find in the fabric department of a craft store; use a mat that has a rubbery look and feel. They help keep paper from sliding, and are far cheaper. I recommend a self-sealing cutting mat. Cuts that you make in the mat "seal" themselves, so that your blade doesn't accidentally slide into an existing groove, suddenly shifting your cutting direction and possibly ruining your project.

    Contact us if you have any questions

    accordion screenshot

    DO NOT USE RUBBER CEMENT!

    Many people have, unfortunately, discovered that rubber cement loses its adhesiveness over time. This means your paper model will eventually fall apart. The glue fumes are also a factor. Every person has their own glue preference. Spray Adhesive is typically good - it's strong and permanent. Some people like to use double-sided tape, and some like to use tacky glues. Hermafix allows you to reposition pieces without tearing the paper.

    • Always dry fit (no glue) pieces before you glue them. It helps to know exactly where and how pieces will fit together so you don't run into any surprises.
    • It's typically better to use less glue than you need; more glue can usually be added with a toothpick or a folded piece of paper (used as a spatula). Using too much glue can be messy.
    • Spreading glue with your fingers is okay, but be extra careful with all of the extra glue that will be on your hands. Otherwise, you can use a toothpick or a spatula-shaped coffee stir stick (no shortage of these at McDonald's).

    Contact us if you have any questions

    contact panel screenshot
    • Take your time; paper backdrop models are supposed to be fun and enjoyable.
    • You'll also get a better-looking backdrop that you can be proud of.
    • Keep your hands clean. Sweat, oil, glue, and other miscellaneous liquids can be absorbed by the paper, causing eventual discoloration, erosion, or a poorly constructed model.
    • Make sure your surfaces are always free of debris. 
    • Don't write or make marks on the printed side, you cannot erase it without ruining the backdrop.

    Contact us if you have any questions

    info box screenshot
    • Cut pieces as you need them. Having multiple pieces can be confusing, and you can make mistakes. Additionally, it will allow the just-glued pieces to set.
    • For intricate pieces, cut the center areas out first. This will leave the outer areas as a gripping area, and reduce the chances of ripping the piece.
    • Also consider how you cut; cutting tugs on the paper, so you don't want to tug against a delicate area.
    • Study the backdrop carefully. If you're not sure where to cut, don't; look at the backdrop until you are reasonably sure.

    Contact us if you have any questions

    Feedback from our Customers at eBay

    "Excellent Item! Great Honest Service."

    Johnny I

    "Backdrop better than pictured, very knowledgeable and helpful"

    Morilloju

    "Great Concept, well worth it!"

    Vinunleaded

    "Terrific graphic background--impressive and great value"

    – pisaman

    "Love It! Great model, I have been looking for one so long, perfect on my layout."

    Glassinthebucket

    "OUTSTANDING! A must buy for all subway modelers!"

    – Walterwol

    "Take it from a retired NYCT Subway Worker - EXTREMELY DETAILED!"

    – exec3549

    "Commendable craftmanship, top quality product."

    – marathonmeister

    "Excellent work. Design was made to my specifications.

    – handatorres

    "AS A RETIRED NYCTA EMPLOYEE, I CAN SAY THAT THIS IS BEAUTIFUL, ACCURATELY CRAFTED!

    – patricej1616

    "Very nice item, and accurate--I know this station well. Thank you

    – ebjensen

    "I thought I was getting off the #7 at Shea, oops...Citifield. Great Stuff

    – javespe